Silicone Tent Stove Jack

Silicone Tent Stove Jack is designed to be installed on the roof of a hot tent. This product is used to connect and fasten the chimney. 

It has excellent heat resistance, and it is easy to install and can be freely cut according to the size of the chimney, so you don't have to worry about mismatches.


  • Top diameter: 55 mm/ 2.17in
  • Bottom inner diameter 115 mm/ 4.53in
  • Bottom outer diameter 160 mm/ 6.3in
  • Weight340g 0.75lb
  • Material: Silicon, Aluminum

Package Included: 

silicone sleeve, ring aluminum sheet, screw


The main part of Tryhomy Silicone Stove Pipe Protector is made of silicone material, which not only has excellent wear resistance, but also has toughness that allows it to be bent and cut at will. You can cut out a required size according to the diameter of the chimney. Applicable chimney diameter ranges from 4.5 cm to 10 cm. If the diameter exceeds 4.5 cm, you need to cut the silicone ring by yourself.

The sealing and elastic properties of silicone can make the hole tightly wrap the chimney pipe, and perform a function in fixing, waterproof and windproof. The corrosion-resistant aluminum base and silicone base can fit snugly on top of a tent. 

You don't have to worry about installation operations, this pipe protector includes all the parts needed for easy installation.

The silicone pipe protector also has the characteristic of heat resistance, which can withstand high temperature of 280 degrees. Meanwhile, its light weight is able to avoid the collapse of the tent due to excessive load.

    Installation Instructions

     (1) Determine the position of the chimney opening on the tent, mark the position of the screw holes on the chimney opening according to the circular steel sheet and cut out the screw holes.

     (2) Put the round steel sheet on the inside of the tent opening, and insert the screws from the inside out to the right screw holes.

     (3) Put the silicone sleeve and the steel sheet in turn on the outside, and tighten the screws with nuts to fix them.

     (4) Cut the inner tent fabric to make a chimney hole.

     (5) After installation, insert the chimney. If the diameter of the chimney is greater than 4.5 cm, the silicone ring can be cut by yourself.

    Silicone Tent Stove Jack- Smilodon

    You may also like